SINTRYON High precision machining anti-static ceramic arm 99.8%Alumina ceramic robotic arm

Email: sintyron@xtlceramic.com

Inquiry Now

Products Center

SINTRYON High precision machining anti-static ceramic arm 99.8%Alumina ceramic robotic arm

An alumina ceramic robotic arm is not typically a single, monolithic ceramic structure. Instead, it refers to a robotic arm system that extensively utilizes
components made from aluminum oxide (Al₂O₃) ceramic in its critical parts, such as the end-effector (gripper), joints, wear plates, or internal components.
This integration leverages the exceptional material properties of alumina to significantly enhance the arm's performance in specific demanding environments.

Product description

Material Introduction:

√ High Voltage Insulator	√ High Purity, Max. 99.8%	√ Various Available Grades
√ Hard and Wear Resistant	√ High Corrosion Resistance	√ High Mechanical Strength
√ Good Thermal Conductivity	√ High Operating Temperature	√ Most Favorable Fine Ceramic

Key Properties of Alumina Ceramic for End Effectors

1.Exceptional Hardness and Wear Resistance
2.High Corrosion Resistance
3.Electrical Insulation
4.High-Temperature Stability
5.Low Density (Lightweight)
6.Non-Magnetic and Non-Sparking

Composition	AL95	AL99
Color	White	Ivory
Density (g/cm³ )	3.72	3.85
Thermal conductivity (W/m. K)	22.3	32 Kpsi
Thermal Expansion (x10^-6 /℃)	8	8.2
Dielectric Constant (at 1MHZ)	9.5	9.8
Loss Tangent (x10^-4 at 1MHZ)	3	2
Volume Resistivity (ohm-m)	>10¹⁴	>10¹⁴
Flexural Strength (N/mm² )	350	500

Alumina ceramic components are found in robotic arms used for:

Automated material handling of abrasive, hot, or corrosive products.

Semiconductor wafer handling and processing.

Cleanroom automation where low particulate generation is required.

Food packaging and processing due to its hygienic, easy-to-clean, and corrosion-resistant nature.

Laboratory automation for handling chemical samples.

Considerations

Brittleness: The primary drawback is brittleness. Alumina components can fracture under sharp impact or excessive tensile (bending) stress.
They must be designed carefully to be loaded in compression, not in tension or bend.

Cost and Machining: High-precision alumina components can be expensive to manufacture and are difficult to machine post-sintering. They
are typically formed to net-shape using powder processing techniques.

FAQ:

Why us?
* Professional manufacturer since 1997.
* Strict quality control on production process and tolerance.
* Free samples available
* Customized production based on your drawing or specification
* On-time delivery and reliable support and service
* Inventory available for quick shipment
* We keep confidentiality of all the drawings and business information between us.
Are you a trading company or a manufacturer?
* We are a manufaturer.
Can you provide the free samples?
* Yes,we can offer free sample if we have it in stock,but the courier fee is to be collected.
Do you accept customized production based our specification?
* Yes,we offer OEM and ODM service. Just send us your drawing if you have it. If you don’t have a drawing, just tell us your idea,
we will work out the drawing for you.

What's the delivery time?
* 7 working days for standard products 30 days for customized products.
What is the MOQ?
* No limit to the quantity. We can offer the best proposal and solutions according to your condition.
What is the payment terms you accept?
* T/T,LC,Western Union,moneygram are acceptable.
How to deal with the faulty?
* Firstly, Our product are produced in strict quality control system and the defective rate will be less than 2%.
If there are problems with the product, we will provide free replacement.